Basic Info.
Model NO.
MFDLNA3BE
Function
Driving, Control
Casing Protection
Protection Type
Starting Mode
Variable Frequency Starting
Certification
ISO9001, CCC
Transport Package
Carton
Trademark
STEP
Origin
Shanghai China
HS Code
9032899090
Production Capacity
5000000
Product Description
wholesale price Panasonic 3-Phase AC Servo Motor And Servo Drive
Panasonic servo motor naming:
Panasonic Servo & motor &PLC packing:
Panasonic Factory:
Panasonic servo motor naming:
| MINAS A6SE, A6SG, A6SF | MINAS A6N/A6B | |||
| Position control | Control input | Clear deviation counter, pulse enable, electronic gear switching, damping control switching, etc. | Controller enable, reference signal, measurement value signal, etc. | |
| Control output | Position control complete, torque reached, con troller status, etc. | Position control complete, torque reached, con troller status, etc. | ||
| Pulse input | Pulse input A | 500kpps (opto coupler) | A6N: Via RTEX network (100MBit) A6B: Via EtherCAT network | |
| Pulse input B | 8Mpps (line receiver) | A6N: Via RTEX network (100MBit) A6B: Via EtherCAT network | ||
| Signal format | Differential input/square-wave pulse | A6N: Via RTEX network (100MBit) A6B: Via EtherCAT network | ||
| Electronic gear | Scaling from 1/1000 to 1000 times | |||
| Smoothing filter | First order low pass filter or FIR filter, customizable | |||
| Analog input (A6SF only) | Torque limit command | Individual torque limit for positive and negative direction | ||
| Instantaneous speed observer | Available | |||
| Vibration suppression | Manual/automatic | |||
| Velocity control | Control input | 1.-3. Selection of internal velocity setup, 4. Speed clamp, etc | ||
| Control output | Set velocity has been reached, etc | Set velocity has been reached, etc. | ||
| Analog input (A6SF only) | Velocity command | Velocity and direction | ||
| Torque limit | Available | |||
| Velocity range | 1-6500r/min | |||
| Internal velocity command | 8 velocity set values | A6N: Via RTEX network (100MBit) A6B: Via EtherCAT network | ||
| Smooth start-up and stopping | Individual setup of acceleration and deceleration from 0 to 10s/1000r/min, S-curve acceleration/deceleration ramp possible. | |||
| Zero speed clamp | Speed clamp input | |||
| Instantaneous speed observer | Available | |||
| Velocity control filter | Available | |||
| Torque control | Control input | Speed clamp input, "Torque under control" input, etc. | Reference signal, limit switch evaluation, etc. | |
| Control output | Set torque has been reached (at predefined ve locity), etc. | Set rotation speed reached, torque reached, etc. | ||
| Analog input | Velocity command | Set speed can be scaled | ||
| Speed limit function | Speed can be scaled | |||
| Full-closed control | Control input | 1. Reset counter, 2. Command pulse inhibition, 3. Electronic gear 4. Filter switching | ||
| Control output | Position control complete (in position) | |||
| Pulse input | Opto coupler (pulse in put A) | 500kpps | ||
| Line receiver (pulse in put B) | 4Mpps | |||
| Signal format | Differential input/square-wave pulse | |||
| Electronic gear | Scaling of pulse frequency from 1/1000 to 1000 times | |||
| Smoothing filter | First order low pass filter or FIR filter, customizable | |||
| Analog input | Torque control | Torque limit available | ||
| Vibration suppression | Manual/automatic | |||
| Scaling of counter pulses | From 1/40 to 160 times | |||
| Other features | Autotuning | Automatic adjustment of the driver's rigidity to the vibration behavior of the mechanical parts and changes to the load. | ||
| Encoder resolution | Any value up to the maximalresolution of the encoder | |||
| Protective function | Error messages causing switch-off | Overvoltage, undervoltage, overspeed, overload, overheat, overcurrent, encoder error, etc. | ||
| Error messages requiring acknowledgement | Exceeding the position deviation, command pulse division error, EPROM error, etc. | |||
| Alarm history | Can be logged for reference | |||
Panasonic Servo & motor &PLC packing:
Panasonic Factory:
